{{ app.busy }}
{{ snackbar.icon }}

RenMesh 设备配置

通过浏览器 Web Serial API 连接设备，读取并修改 RenMesh 本地配置。

Enter a hex prefix (1-6 characters) for your public key. Uses {{ vanity.cores }} CPU cores.

warning Prefixes starting with "00" or "FF" are reserved by MeshCore.
Prefix {{ vanity.prefix.toLowerCase() }}...
Expected attempts {{ (Math.pow(16, vanity.prefix.length)).toLocaleString() }}
Estimated time {{ vanity.estimatedTime }}

Searching for public key starting with {{ vanity.prefix.toLowerCase() }}...

Attempts {{ vanity.attempts.toLocaleString() }}
Elapsed {{ vanity.elapsed }}
Speed {{ vanity.keysPerSec }} keys/sec
check_circle Found a match in {{ vanity.attempts.toLocaleString() }} attempts ({{ vanity.elapsed }})
warning Applying this key changes the device identity. A reboot is required.
{{ entry.text }}
>  {{ consoleSuggestion }}
设备已连接
连接配置设备

可以读取信息、修改名称位置、调整无线参数，并在保存后写入设备。

请使用 Chrome / Edge 浏览器，通过 USB 连接 RenMesh 设备后读取和修改本地配置。

USB Serial 离线可用
usb 连接设备后加载配置 当前仍在这个配置页面，连接成功后这里会直接显示设备信息。
Info & Actions
Name & Location
Max length is 24 bytes with location set, 32 otherwise. Emoji and unicode may take more than one byte.
Access
设置新的管理员密码。使用此密码的节点将被加入管理员访问控制列表。默认值："password"。
设置或更新访客密码。建议留空，这样用户可以访问所有者信息和邻居功能。
Room server settings
Radio settings

Suggested radio settings per region.

These radio settings have been suggested by the community.

Power level of the LoRa chip (1-22 dBm). Some boards have an additional amplifier. Setting too high may violate local regulations.

After each transmission, the repeater enforces a silent period proportional to the on-air time. You are responsible for choosing a value appropriate for your jurisdiction (e.g. EU 868 MHz requires 10% duty cycle).

Airtime factor (AF): {{ app.device.vars.af }}
Default: 1 (~50%)

Advertising
Zero-hop advert interval in minutes, rounded to nearest multiple of 2 (60-240, or 0 to disable).
Default: 0
Flood advert interval in hours (3-168, or 0 to disable).
Default: 47 (repeater), 0 (sensor)
Maximum flood hop count (0-64).
Default: 64
Owner info
Advanced settings

Rejects flood packets that appear to be in a loop.
Default: off. Requires firmware 1.14+

Minimal: drops if own hash appears 4+ times (1-byte) or 2+ (2-byte). Moderate: 2+ (1-byte) or 1+ (2-byte). Strict: 1+ for all sizes.

Sets the ID/hash encoding size used in adverts.
Default: 0. Requires firmware 1.14+

0: 1-byte (256 IDs, max 64 flood). 1: 2-byte (65K IDs, max 32 flood). 2: 3-byte (16M IDs, max 21 flood).

Older firmware (<1.14) will drop packets with multi-byte hashes.

Local interference threshold.
Default: 0
AGC reset interval in seconds, rounded down to a multiple of 4.
Default: 0
[Experimental] Processing delay for received traffic (0-20).
Default: 0
Retransmit delay factor for flood traffic (0-2).
Default: 0.5
Retransmit delay factor for direct traffic (0-2).
Default: 0.2
info You have unsaved changes
使用说明
  • 配置页需要浏览器支持 Web Serial API。
  • 连接前请确认设备已通过 USB 数据线接入电脑。
  • 如果浏览器没有弹出串口选择窗口，请检查浏览器权限和 USB 驱动。